a magazine for success minded, ethics driven, and fashionably chic women™

2011- 2012 (c) The New MADE Revolution Magazine a division of 3 Impressions, inc. Disclaimers and the fine print.

Space Bleed Non-Bleed Trim Live
Full Page/Cover 8 1/4" x 11 1/8" 7" x 10" 8" x 10 7/8" 7 1/2" x 10 3/8"
1/2 Vertical  4 1/8" x 11 1/8" 3 1/2" x 10" 3 7/8" x 10 7/8" 3 3/8" x 10 3/8"
1/2 Horizontal 8 1/4" x 5 5/8" 7" x 4 7/8" 8" x 5 3/8" 7 1/2" x 4 7/8"
1/3 Vertical  2 7/8" x 11 1/8" 2 1/4" x 10" 2 5/8" x 10 7/8" 2 1/8" x 10 3/8"

 
SAFETY: All live matter must be 1/4 inch from trim on all sides.

GUTTER SAFETY: 3/16 inch on each side (total 3/8 inch).
Minimum size knockout type should be 8 point.
Note: Perfect alignment of type or design across the gutter of two facing pages cannot be guaranteed.

AD REQUIREMENTS
All ad submissions must be PDF/X-1a files uploaded sent via YouSend It.com

The PDF/X-1a files must have:
• All fonts MUST be embedded (True Type fonts cannot be used for Printing).
• The color space must be CMYK or Grayscale. No RGB, LAB or embedded color profiles (such as ICC profiles).
• No files with PMS colors will be accepted without prior notification. Otherwise, all PMS colors MUST be converted to CMYK.
• Maximum ink density: 300 total.
• Resolution: 300 dpi.

PROOF REQUIREMENTS:
A certified SWOP3 supplied proof to:
The New MADE Revolution Magazine
Attn: Production Department
9221 E Baseline Rd, SteA109-600
Mesa, AZ 85209

• All proofs should have clear identification of the type of proof it is and the name, address and phone number of the sender/pre-press service provider.
• Preferred proof is Epson, running color managed SWOP 3 profiles, on type 3 substrate.
• All proofs must include the IDEAlliance Color Control Bar. To download color strip go to hot downloads at: http://idealliance.org )
In compliance with BGS/ 3 Impressions, inc policy, you are required to submit a SWOP 3 certified proof. By choosing not to supply a SWOP certified proof with this ad submission the color reproduction of the ad will be based on industry standard best practices to achieve as accurate color as possible from the supplied digital file. If you do not supply a SWOP certified proof, a laser content proof will be required. Failure to submit a laser proof may jeopardize the final content within your ad.

FILE STORAGE:
The original proof and an archived copy of the digital ad file will be kept for 13 months after printing.

GENERAL MATERIAL DEADLINE:
Materials are due at ad close. Ad close is 3 months prior to the 1st of the issue month.